Setting BIOS to Boot from CDROM And Install Windows XP

Windows XP adalah suatu sistem pengoperasian (operating system) yang paling banyak dipakai sampai saat ini karena selain kemudahan dalam pemakaiannya Windows XP digunakan sebagai standarisasi pembelajaran yang di pakai oleh sekolahan-sekolahan dan perguruan tinggi pada umumnya.

Untuk melakukan penginstalan windows xp diperlukan ketelitian dan kesabaran dalam prosesnya karena memerlukan waktu yang lumayan lama.

Ada beberapa jenis windows xp diantaranya windows xp professional, Home Edition, Media Center Edition, Tablet PC Edition, Starter Edition, Professional x64 Edition, Professional 64-bit Edition For Itanium.

berikut langkah-langkah yang mudah dan lengkap cara menginstal windows xp :

1. Siapkan CD WINDOWS XP

2. Siapkan CD DRIVER MOTHERBOARD

3. Atur bios terlebih dahulu agar prioritas bootingnya dimulai dari CD(DVD)-ROM, caranya:

a. Masuk ke BIOS dengan menekan tombol Del, atau F1, atau juga F2.
Pilih menu Advanced Settings, kemudian carilah ‘Boot Priority’ atau yang sejenis.

b. ubah pengaturanya, agar CDROM jadi urutan yang pertama kemungkinan pilihan ini ada 2 jenis

* menu ‘First boot priority’, ‘Second boot priority’ dll: Aturlah ‘First boot priority’ ke ‘CDROM’ dengan menekan tombol PgDn/Pgup (Page Down/Up) atau +/-.
Atur juga ‘Second boot priority’nya ke HDD0/HDD1.
* Jika menunya ‘Boot priority’: atur ke ‘CDROM, C, A’ atau ‘CDROM, A,

C. dengan menekan tombol PgDn/Up.

Cara paling mudah instal windows xp
(lengkap dengan gambar):

gak usah di utak-atik biosnya. biarin aja bios diload masukin CD WINDOWSnya, lalu Restart komputer, trus tekan-tekan F8 atau F10 atau F11 (boleh dicoba satu-satu) nanti bakal muncul opsi boot selection. pilih aja yg ada 'bau' cd-nya. trus enter. selesai deh...ga pake repot-repot...

4. Tunggu beberapa saat sampai muncul tulisan "press any key to boot from CD" seperti tampilan Seperti gambar di bawah ini



5. Tekan ENTER atau sembarang tombol, lalu proses instalasi akan mengecek hardware komputer anda, kemudian akan muncul tulisan "windows setup" seperti gambar dibawah ini



6. lalu file-file di dalam cd akan di load ke dalam komputer, kemudian akan muncul tampilan "welcome to setup" seperti gambar dibawah ini



7. Tekan "ENTER" untuk menginstal windows xp, "R" untuk repair system windows yang sebelumnya pernah terinstal, "F3" untuk keluar dari proses instalasi, lalu akan muncul (End User Licese Aggrement) seperti gambar di bawah ini



8. Tekan "F8" kemudian proses instalasi akan mencari dan membaca partisi hardisk anda, kemudian akan muncul semua partisi hardisk anda, seperti gambar di bawah ini



9. Tekan "ENTER" untuk langsung menginstal windows, "C" untuk membuat partisi hardisk anda, kapasitas partisi sesuai dengan kebutuhan anda, dalam satuan MB, selanjutnya jika anda membuat partisi dengan menekan tombol "C", maka akan muncul gambar seperti di bawah ini



10. Kemudian tuliskan kapasitas partisi yang ingin anda buat, seperti terlihat pada gambar diatas, sebagai contoh, misalkan kapasitas hardisk anda 40 GB, lalu anda ingin membagi dua, maka tuliskan 20000,jangan 20, karna partisi satuannya MB, tentunya anda mengerti kan...?? cat" 1GB = 1000 MB

11. Kenudian tekan "ENTER" maka akan muncul gambar seperti dibawah ini



12. kemudian pilih "format the partition using the NTFS file system (Quick)" atau "format the partition using the NTFS file system (Quick)" lalu tekan "ENTER" maka akan muncul layar sepert gambar di bawah ini



13. Kemudian arahkan pointer pada posisi "unpartitioned space", lalu tekan "C" maka akan muncul gambar seperti gambar sebelumnya, dalam hal ini layar yang akan muncul seperti gambar sebelumnya menunjukan sisa partisi yang telah anda bagi, jika anda cuma membagi 2 partisi saja maka langsung tekan "ENTER" tapi jika anda ingin mempartisi lagi sisa hardisknya maka tinggal di bagi lagi aj, seperti langkah-langkah sebelumnya, mengertikan maksud saya....??
setelah selesai partisi ketika anda menekan "ENTER" seperti yang di jelaskan di atas, maka akan muncul gambar sperti gambar diatas, setelah itu arahkan poiter di posisi C: partition1 [New Raw], tapi biasanya sudah berada di posisi tersebut, maka anda tinggal menekan "ENTER" saja untuk proses instalasi windows, kemudian akan muncul proses format seperti gambar di bawah ini



14. Setelah selesai format, kemudian windows akan ,menyalin file untuk proses instalasi, seperti gambar di bawah ini



15. Setelah proses penyalinan selesai, secara otomatis komputer akan melakukan restart seperti gambar di bawah ini, dalam hal ini untuk mempercepat proses restart, anda bisa langsung menekan "ENTER"



16. Setelah itu akan muncul loading windows seperti gambar di bawah ini



17. selanjutnya proses instalasi windows di mulai 1..2..3...GOoooo muncul layar seperti gambar di bawah ini



18. selanjutnya tinggal menunggu, sambil ngopi jg bisa, biar lebih terinspirasi, eitssss, tp jangan kemana mana dulu, karna selanjutnya akan muncul layar seperti gambar di bawah ini



19. Langsung klik "NEXT" aja BOS...!!! lalu mucul lagi bos layar seperti gambar di bawah ini



20. Isi nama dan organisasinya, terserah BOS aja... lalu tekan "NEXT" kemudian akan muncul layar seperti gambar di bawah ini



21. Masukan serial nombernya, jangan sampe salah ya....!!! kemudian tekan "Next" selanjutnya akan muncul layar administrator, isi aja mau dinamain apa komputernya, terserah deeeehhhhh......
kalau mau pake pasword tinggal di isi juga paswordnya, terserah juga mo apa paswordnya.... lalu tekan "Next" maka muncul layar Date and Time Setting seperti gambar di bawah ini




22. Masukan settingan jam dan tanggal, tentukan juga time zone anda, untuk jakarta : pilih GMT+7 Klik "Next" lagi BOS.... setelah proses instalasi windows delanjutkan, seperti gambar di bawah ini



23. Silahkan Menunggu lumayan lama BOS,.... sampai muncul layar seperti gambar di bawah ini



24. Selanjutnya akan muncul layar work group or computer Domain,seperti gambar di bawah ini



25. jika komputer anda terhubung dengan sebuah domain, maka isikan nama domainnya, tapi jika komputer anda stand alone, maka pilih radio button yang paling atas, lalu tekan "Next"

26. Selanjutnya akan muncul display setting, seperti gambar di bawah ini, klik "OK" aja BOS....!!!



27. Kemudian windows akan mendeteksi tampilan optimal dari PC anda, seperti terlihat pada gambar di bawah ini, Klik "OK" aj BOS...!!!



28. Proses instalasi hampir selesai BOS..... selanjutnya akan muncul loading jendela windows seperti gambar di bawah ini



29. Selanjutnya anda akan dibawa masuk ke dalam windows untuk pertama kalinya seperti terlihat pada gambar di bawah ini, tekan "Next" aj BOS..



30. Selanjutnya akan muncul layar "Help Protect Your PC", seperti gambar di bawah ini, kemudian pilih "Not Right Now" lalu tekan "Next"



31. Kemudian komputer akan mengecek koneksi ke internet, seprti terlihat pada gambar di bawah ini, pilih "Yes" lalu tekan "Next"



32. Kemudian akan muncul pilihan aktivasi windows, seperti gambar di bawah ini, lalu tekan "Next"



33. Setelah itu akan muncul tampilan seperti gambar di bawah ini yang menunjukan pilihan untuk menambah pengguna komputer, Anda bisa memasukkan beberapa pengguna yang akan mengakses komputer Anda, Namun jika satu akun sudah cukup, atau Anda menginstall komputer untuk dipakai bergantian, cukup masukkan satu user kemudian klik "Next"

34. Proses instalasi windows selesai, kemudian akan muncul layar seperti gambar di bawah ini, klik "finish", maka proses instalasi selesai.....



35. Selesailah sudah semua.... kemudian perlahan masuk ke windowsnya seperti telihat pada gambar di bawah ini




36. Kemudian tinggal menginstal CD Driver Motherboad, dan perangkat pendukung lainnya....

How To Assemble And Build A PC

Got hold of your favorite components but pondering over how to assemble/install them to get your monster rig up? Do not worry, this guide will help you begin from scratch and give step by step instructions so that you can get your new PC up and running in a short amount of time. So here we go!

Things to get in place before starting:

• Anti-static wrist strap
• Set of screwdrivers and pliers
• Piece of cloth
• CPU Thermal compound (recommended)
• PC components

Tip: CPU Thermal compound is not a necessity but it is recommended to keep your CPU cool under load conditions by helping heat dissipate faster. It is a must if you intend to overclock your PC.
Note: You can find the meaning of an abbreviation at the end of this article under the heading Jargon Buster.

Step 1: Installing the motherboard

Make sure you have all the components in place and a nice, clean and big enough place to work with.
Put your antic-static wrist strap on to prevent your components from getting affected. Make sure your hands are clean before starting. First we will be installing the motherboard which is a piece of cake to install.

• Open the side doors of the cabinet
• Lay the cabinet on its side
• Put the motherboard in place
• Drive in all the required screws

Tip: Most motherboards come with an antistatic bag. It is advisable to put the motherboard on it for some time and then remove it from the antistatic bag before placing it in the cabinet.

Step 2: Installing the CPU

CPU is the heart of a computer so make sure you handle it properly and do not drop it or mishandle it. Also try not to touch the pins frequently so that they do not get dirty. Get hold of your motherboard and CPU manual. You need to place the CPU on the dotted white patch of the motherboard in a particular fashion for it to fit properly. There is a golden mark on the CPU to help you assist. Consult both your motherboard and CPU manual to see which position it fits exactly or you could also use try all the 4 positions.

• Lift the CPU lever on the motherboard
• Place the CPU properly on the motherboard
• Pull down the lever to secure the CPU in place

Warning: Do not try to push the CPU into the motherboard!
Got the thermal compound? Now is the time to use it. Take small amount of it and carefully apply it on the top surface of the processor. Be careful not to put it on the neighboring parts of the motherboard. If you do so clean it immediately using the cloth.
Tip: Thermal compounds should be changed once every six months for optimal performance.

Step 3: Installing the heat sink

After installing the processor we proceed to installing the heat sink. There are different kinds of heat sinks that are bundled with the processor and each has a different way of installation. Look into your CPU manual for instructions on how to install it properly.

• Place the heat sink on the processor
• Put the jacks in place
• Secure the heat sink with the lever

After this you will need to connect the cable of the heat sink on the motherboard. Again look into the motherboard manual on where to connect it and then connect it to the right port to get your heat sink in operational mode.

Step 4: Installing the RAM

Installing the RAM is also an easy job. The newer RAMs ie. DDR RAMs are easy to install as you don’t have to worry about placing which side where into the slot. The older ones, SDRAMs are plagued by this problem.
If you want to use dual channel configuration then consult your manual on which slots to use to achieve that result.

• Push down the RAM into the slot
• Make sure the both the clips hold the RAM properly

Step 5: Installing the power supply

We will now install the power supply as the components we install after this will require power cables to be connected to them. There is not much to be done to install a PSU.

• Place the PSU into the cabinet
• Put the screws in place tightly

Tip: Some PSU have extra accessories that come bundled with it. Consult your PSU manual to see how to install them.

Step 6: Installing the video card

First you will need to find out whether your video card is AGP or PCI-E. AGP graphics cards have become redundant and are being phased out of the market quickly. So if you bought a spanking new card it will certainly be a PCI-E.

• Remove the back plate on the cabinet corresponding to the graphics card
• Push the card into the slot
• Secure the card with a screw
• Plug in the power connection from PSU (if required)

High-end graphics cards need dedicated power supply and if your graphics card needs one then connect the appropriate wire from PSU into the graphics card.

Step 7: Installing the hard disk

Hard disk is another fragile component of the computer and needs to handled carefully.

• Place the hard drive into the bay
• Secure the drive with screws
• Connect the power cable from PSU
• Connect the data cable from motherboard into the drive

If your hard drive is a SATA one then connect one end of SATA cable into the motherboard and other into the SATA port on the hard disk. If your hard disk is PATA type then use the IDE cable instead of the SATA cable.
Tip: If your PSU does not support SATA power supply then you will need to get an converter which will convert your standard IDE power connector to a SATA power connector.

Step 8: Installing optical drive

The installation an optical drive is exactly similar to an hard drive.

• Place the optical drive into the bay
• Drive in the screws
• Connect the power cable and data cable

Tip: When installing multiple optical drives take care of jumper settings. Make sure you make one as primary and other slave by using the jumper. This is not applicable if the drives are SATA drives.

Step 9: Connecting various cables

First we will finish setting up internal components and then get on to the external ones. You will need to consult your motherboard manual for finding the appropriate port for connecting various cables at the right places on the motherboard.

• Connect the large ATX power connector to the power supply port on your motherboard
• Next get hold of the smaller square power connector which supplies power to the processor and connect it to the appropriate port by taking help from your motherboard manual
• Connect the cabinet cables for power,reset button in the appropriate port of the motherboard
• Connect the front USB/audio panel cable in the motherboard
• Plug the cable of cabinet fans

You are done with installing the internal components of the PC. Close the side doors of the cabinet and get it upright and place it on your computer table. Get the rest of the PC components like monitor, keyboard, mouse, speakers etc. which we will connect now.

• Connect the VGA cable of the monitor into the VGA port
• If mouse/keyboard are PS/2 then connect them to PS/2 ports or else use the USB port
• Connect the speaker cable in the audio port
• Plug in the power cable from PSU into the UPS
• Also plug in the power cable of the monitor

You are now done with setting up your PC. Power on and see your rig boot to glory.

Step 10: Installing the OS and drivers

We are done with the hardware part. Now get your favorite OS disks ready and the CD that came with your motherboard.

• Set the first boot device to CD/DVD drive in BIOS
• Pop in the OS disk
• Reboot the PC
• Install the OS
• Install drivers from motherboard CD (applicable only to Windows OS)

Thanks to blogger for visited

Bimz Soshi

Practice makes perfect - sometimes

"Practice makes perfect" is one of the top-ten most common English language expressions. But is it true? In order to achieve the desired result, perfection requires more than just repetition. Repetition of a bad habit can ensure unmatched mastery of that habit, but that's probably not the desired result.

Does the photo look familiar? It was in the Daily Inspiration of five days ago. Repetition.

Practice alone is not enough, and may be counterproductive. To achieve your desired result:

1. Be clear of your objective.

2. Visualize your end result as having already been accomplished. Let the image of your success play on the giant screen in full color with surround sound - so real you can smell and taste it.

3. Establish a set of daily practices that will lead to the result you want.

4. Finally, with the first three pillars in place, practice, practice, every day practice.

Thanks to blogger for visited

Bimz Soshi

Say no to " Surrender "

Hello everyone,


I would like to discuss about everything about our life, our decision, our journey .. if one day you got a problem or a choice among several options provided to you, through experience what I experienced was the "think clearly and correctly before taking a decision".

Because what?
Because in every decision that you decide, it is one way of life and should you go through with all my heart without hesitated and hesitated again .. therefore, think before making a decision.

Why?
If you take a decision by thinking before choosing the path of your life and really serious with your life, then you will live in accordance with the wishes and direction of your goals will go well and live without the burden of thinking.




However, if in every decision you take, if not in going through with all your heart and serious, then you will regret it later on and will feel like giving up and away from you take these decisions. so, your life will be messy and disorganized, and you are confused about which direction your true purpose.


If you experience this, please say no to "surrender". keep moving forward and adjust is the life that you choose and take responsibility for what you decided before. 

Because if you stop at half way it means you give up without a fight. 

So enjoy this life with all his heart and positive thinking, make it is all the criticism from your friends into a positive direction and the motivation in your life.

I think that's all of suggestion

Thanks to blogger for visited

Bimz Soshi

Motivation For Life

Hello Everyone,

My name is Bima

I have something to share to you all .. 
This is Motivation for your life, 

hopefully help for your life and make your life more better than before. ^.^v

Keep yourself from a bank loan or credit card with what you have and remember this:

A. Money does not create humans, humans who created money.

B. Live simply as yourself.

C. Don't do anything they say, listen to them, but do what's right.

D. Don't wear brand, wear really comfortable for you.

E. Don't spend money on things that are not really important.

F. If it has been successful in your life, share and teach others.

"People isn't happy people great in all things, but people can find it simple in his life and give thanks."

Thanks to blogger for visited

Bimz Soshi

Happily Ever After

The Relationship Problems You are Not Told About in Fairy Tales

Relationships are one of them things you think you have figured out completely, until you are finally in one. With the perfect veneer created by disney movies and the cliches we are bombarded with thanks to your modern rom-com it is difficult to understand that sometimes there are problems. These are some tips that I have learned which I hope will help you.
1)
Never judge your relationship against someone elses
We all do all the time, why are we not as romantic, why are they so happy, why do we argue so much. The truth is every relationship will face problems now and then but what you have to remember is nobody displays these problems in full view. If you have an argument with your boyfriend right before that party full of family and friends what do you do. You will do what everyone does, paint on your smile and act like everything is fine. Concentrate on what your relationship means to you and not what you think it should mean.
2)
Never stay with someone because you are scared of being single again
This happens a lot and however difficult it may be to leave someone and start afresh it will be even more difficult if you leave it longer. Being single again after a long term relationship is terrifying, definitely but what about staying with someone you do not love? If you think a relationship can be repaired or rejuvenated, by all means give it your best but if it is dead move on.
3)
Never feel bad for being in a relationship
Unless you are very lucky, moving from being single to being with someone is going to change your other relationships with friends. However much you juggle and make time you are going to see them less and in different circumstances. If they are true friends they will understand and there will be no problem but some people get jealous or resentful, don't let them ruin your relationship with your partner!
4)
Romance is rare
Unless you are still in the honeymoon period of your new relationship or you are a character played by Jennifer Aniston it is likely romance does not happen every minute of every day, this is completely normal! Think about it, if you got them bouqet of roses or that surprise meal every single day would it still be special? Of course not and that is why keeping romance and romantic gestures to an occassional occurance is healthy in any relationship, you will appreciate them more.
5)
People make mistakes
This is hard one to get if the mistake is cheating but it is true. We are all human and are definitely infallable, it is your decision wether you can find it within yourself to forgive and forget.
6)
If you need to argue, argue!
A healthy relationship has common arguments and tears because this is how we release are pent up emotions and worries. If you are not arguing that is the time to worry, so if you feel the need to scream at him for not taking the rubbish out, do it, just don't argue over everything.
7)
True love is hard to find
This is one the disney movies got right, if you love someone and they love you back you are a lucky person indeed. The world is full of crappy relationships and exes and if you think you have found true love, protect it with all you've got because you are in the minority.
8)
Love comes in all shapes, sizes, colours and genders...
Do not discriminate, if you have the right to love whoever you wish, so does everybody else.
These are just some of my thoughts and feelings.

Sweet Words of Love

If all off sudden day time never looked so bright.
Any kind of beat or noise sounds like pop music.
And the clock hour hand feels like it takes forever to move when he/she is not around.
Let me tell you something: You're in love!
Below are my collections of sweet words of love I've collected since my highschool time. Hope this may help you who are in love right now in some way. Most of them are short, you can put it in your facebook (or other social networking profile) status, write it in a card, or you can just simply send it using SMS by your mobile phone
Good luck!

My love for you is like getting a diarrhea, I just can't hold it in.

If my love is a question, I'm sure u are the answer

___

Love you a little bit more

I love you a little bit more when you call me honey
I love you a little bit more when you hold my hand
I love you a little bit more when you hug me.

I love you a little bit more. Every day.

If

If I never met you, I wouldn't like you.
If I didn't like you I wouldn't love you.
If I didn't love you I wouldn't miss you.
But I did, I do and I always will

---
If loving you is wrong, then I don't want to be right!

---
If loving you is a crime. I'd like to be jailed for my whole life, in your heart.

---

I love you. Like a fat kid loves cakes.

---

If you have 1000 years of age, I just want to have 999 years and 364 days, so I never have to live a day without you

I love thee

I Love thee, I love but thee. With a love that shall not die. Till the sun grows cold, and the stars grow old.~William Shakespeare

Wouldn't be

The sun wouldn't be Red, the sea wouldn't be blue, the stars wouldn't be bright, I wouldn't be happy without you.

When I don't message you

When I don't message you.Doesn't mean.
I forgot about you.
I was just giving you time.

To miss me.

----

My love for you is a journey. Starting at forever and ending at never.

---

My love is as boundless as the sea,My love as deep.
The more I give to thee, the more I have. For both are infinite.
~ William Shakespare

Days without you

Without you my days are "Sadday,"Moanday, "Tearsday, "Wasteday, "Thirstday, "Fightday", and "Shatterday"

How Rich I Am

I opened my wallet and I find it empty, reached into my pocket and found a few coins, searched my heart and I found you!
Then I realized how rich I am.

Time to Time

365Days dreaming of you.8760Hr thinking of you.
525600Mins missing you.
315360000Milisec just wanted to tell you how much you mean to me.

Fell from Heaven

Dear, did it hurt when you fell from Heaven? I think, I need to call God because He have lost His most beautiful Angel.

Behind you

Behind your smile, I know there are sorrows.Behind your laughters, I know there are tears.
But I want you to know that, behind you is me who always care for you.

Only one you

There are 12 Months in a year.4 weeks in a month.
7 days in a week.
24 Hrs in a day.
But there's only one you in a life time.

The sweetest

Sweet-Cotton candy? Nope! Chocolate syrup? Nah!
Let me see.. How about sugar? Of course not!
There is nothing as sweet as you